Screens & players· 4 min read

LG commercial displays (webOS)

Install the player directly on an LG signage display.

LG commercial displays run webOS. The player runs on the screen itself, with no extra hardware.

Before you start

  • An LG display from the professional Digital Signage line. Consumer and “commercial-lite” LG TVs can’t install the player. Use a plug-in player with those.
  • webOS 4.x, 5.x, 6.x or 8. Check under Settings (gear) → General → System Information. webOS 2 and 3 aren’t supported.
  • The player app address we send you. Ask here.
  • Your screen key from the Studio. See Connect a screen.
  • A cable connection needs no setup. For Wi-Fi, connect first.

1. Prepare the display

Press the gear button on the remote, then:

  1. Portrait (optional): Display → Rotation → Screen Rotation.
  2. Energy: Display → Advanced Settings → Energy Saving → turn off Smart Energy Saving.
  3. Auto power-off: General → Power → turn off No IR Power Off (4 Hour). It’s on by default and turns the screen off after 4 hours.
  4. Wi-Fi: General → Network.
  5. Clock: General → Time & Date. Check the time zone, date and time.

2. Install the player

  1. Gear → Ez Setting → SI Server Setting, then open SI Server Setting again.
  2. Turn on Fully Qualified Domain Name and enter the app address we sent you.
  3. Set Application Launch Mode to Local and Application Type to IPK.
  4. Press the Remote button (to the left of Local Application Upgrade) and confirm.
  5. When it finishes, turn the display off, wait 10 seconds and turn it on. The player opens by itself.

Option B: From a USB drive

  1. On a USB drive, create a folder named application (lowercase) at the top level.
  2. Put the player file we send you in that folder, with the exact file name we give you.
  3. Connect a USB hub to the display with the drive, a keyboard and a mouse.
  4. Gear → SI Server Settings: Launch Mode Local, Application Type IPK, USB Application Upgrade → USB.
  5. When it finishes, restart the display.

3. Set up the player

  1. Type your screen key in the Screen box.
  2. Check Auto start.
  3. Press Play and watch one full loop.
  4. To stop, click near the top of the screen and press the square Stop button.
  5. Gear (top right) → Notifications → turn off Display Notifications.
  6. Press Esc or Back, then Play.

Fixes

ProblemFix
Can’t find the install optionCheck it’s a Digital Signage model, not a consumer TV.
Screen turns off after 4 hoursTurn off No IR Power Off (4 Hour) under General → Power.
Wrong timeGeneral → Time & Date.
Can’t find the appPress Home; it’s in the bottom bar.
Nothing playsCheck the screen key, that Auto start is on, and that you pressed Play.

Good to know

On webOS, video-to-video transitions may not be perfectly smooth, synchronized playback isn’t supported, and a few widgets (FTP, ads, some streaming formats) aren’t available. Touch works with the Touch widget. Power BI dashboards need webOS 4 or newer.

Still need help?

Send the screen name and what you see. We’ll take a look.

Contact support