Some Android devices flash black for a moment when one video switches to the next. It’s usually fixable in the player settings.
Before you change anything
- Make a short test playlist with two or three videos so you can see the problem quickly.
- Note when it happens: video to video, video to image, or between creatives.
- Write down your current settings so you can go back.
- Check your videos are MP4 (H.264) and not larger than the screen needs. See media tips.
Step 1: Try the transition modes
- Stop playback and open the player’s Settings → Display.
- Find Video to Video Transition and try each mode, one at a time.
- Replay your test after each change. Stop when it looks smooth.
Step 2: Fine-tune (only if needed)
If the basic modes don’t fix it:
- Go to Settings → Advanced → Video Transitions Tune.
- Turn on Manual Init Compensation.
- Start Buffer Delay at 100 ms. Try 120, then 150, then 200, watching several full loops each time.
- Use the smallest value that looks smooth. Too high and the first frame of each video may freeze briefly. The maximum is 1500 ms. Leave Buffer Count as it is.
Step 3: Check the device itself
Some Android devices change their screen refresh rate automatically. Look in the device’s own Display settings for something like “auto refresh rate” or “frame rate matching” and try turning it off.
Don’t install new firmware from the internet to fix this. Ask us first and send your test results.
Still need help?
Contact support Send the screen name and what you see. We’ll take a look.